Table of Contents
Advertisement
DESCRIPTION OF THE APPLIANCE
Appliance specifications
Model
Total power
Front heating zone
Nominal power
Rear heating zone
Nominal power
Residual heat indication
The cooktop is equipped with a residual heat display. A lamp has been allocated to each individual
cooking zone. This lamp will light up as soon as the respective cooking zone has heated up to warn
against touching the cooking zone surface unintentionally. As long as the lamp lights up, even after
the cooking zone has been switched off, the residual heat can be used to melt or to keep the food
warm. The cooking zone surface may still be hot after the lamp switches off. Risk of burn!
STARTING UP AND APPLIANCE OPERATION
Before using your new cooktop
Clean your cooktop with a damp cloth and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted color on the ceramic glass surface.
Starting up
•
Start-up / switch off the cooktop:
Action
To start
To stop
•
Set the power level of a cooking zone:
Action
To set the power
To stop
Control panel
Push and turn the knob of a cooking zone
Turn the knob back to the On/Off symbol
Control panel
Turn the knob clockwise to increase the power and
counterclockwise to decrease the power
Turn the knob back to the On/Off symbol
8
CREK2B
CREK2W
3,000 W
6"
1,200 W
7 ½"
1,800 W
Advertisement
Table of Contents
