Ecco EC7000-QK Installation Instructions Manual page 6

LEFT/RIGHT/FRONT/BACK: To rename the camera locations.
DISPLAY: To turn on/off display.
MAIN MENU
CAMERA
CAMERA
OSD
SYSTEM
TRIGGER
TRIGGER
SPLIT
RESET
SCALE: Turn on/off electric distance label. When set as ON, electronic distance label will be displaced when rear
view camera (camera 3) is activated.
INPUT SCAN: To turn on/off auto identification of camera inputs. When INPUT SCAN is set as ON, monitor will
display connected cameras and skip inputs not in connection.
SPEAKER: To turn speaker on/off.
TURN SHOW: To turn Turn Show on/off.
BOUNDARY: To set color of the separation line between camera inputs. White, gray, black and uncolored are
available.
LANGUAGE: To set OSD language. English, Finish, Netherlands, Espańol, Deutsch and Italiano.
SOFTWARE VERSION: To be updated at all times.
MAIN MENU
CAMERA
CAMERA
OSD
SYSTEM
TRIGGER
TRIGGER
SPLIT
RESET
REC-V OUT: To set the camera input(s) to be recorded when connected to DVR via the green RCA wire. Left-
side, right-side, front view, rear view camera and quad view image can be selected.
AUTOSCAN: To set the auto scanning function. When AUTOSCAN is set as ON, monitor will automatically switch
between connected camera inputs and quad image.
SCAN DELAY: To set the switching time of AUTOSCAN. Switching time frame: 0-60 seconds.
JUMP KEY: To set the shortcut display mode from the 13 modes to the left. It can be activated by jump key
selector. Options: Left, Right, Front, Back, Quad, Dual, Dual2, Triple, Triple 2, Pip 1, Pip 2, Pip 3, H-Split, Trefoil
and Y-Split.
P-ON MODE: To set the default display model from the 13 modes to the left or STANDBY mode. Options: Left,
Right, Front, Back, Quad, Dual, Dual2, Triple, Triple 2, Pip 1, Pip 2, Pip 3, H-Split, Trefoil and Y-Split.
SETUP
NAME
or
SETUP
SETUP
SETUP
PRIORITY
SETUP
ALL
SETUP
NAME
SETUP
SETUP
SETUP
PRIORITY
SETUP
ALL
SCALE
INPUT
SPEAKER
TURN SHOW
BOUNDARY
LANGUAGE
REC-V OUT
AUTO-SCAN
SCAN DELAY
JUMP KEY
or
P-ON
BEEP
SYSTEM
DIMMER
OSD SETUP
(ON/OFF)
(ON/OFF)
(ON/OFF)
(ON/OFF)
BLACK/GRAY/WHITE/OFF
(see selection below)
(SOFTWARE VERSION)
SYSTEM SETUP
(see selection below)
(ON/OFF)
(select scan delay)
(see selection below)
(see selection below)
(ON/OFF)
(PAL/NTSC)
(selection backlight)
Page 6 of 8