PRESS RELEASE
®
Surge-Trap
STZ series Surge Protective Device (SPD)
Danger – Hazard of Electrical Shock, Explosion or Arc Flash
•
Only qualified licensed electricians should install or service SPDs
•
Verify that all power circuits are de-energized before making connections. SPDs should never be installed or serviced
when energized or during electrical storms
•
Follow safe electrical work practices and use appropriate safety precautions including Personal Protection Equipment
(PPE)
•
Confirm XO N-G bonding at upstream transformer
•
When used in outdoor applications, customer must seal the conduit nipple using watertight fittings (not included) to
ensure watertight connection
•
Read this manual in its entirety prior to installation
•
These installation instructions do not replace the national or local electrical codes
•
Failure to follow these instructions can result in death, serious injury and/or equipment damage
•
Caution – Ungrounded power systems are inherently unstable and can produce excessively high line-to-ground voltages
during certain fault conditions. During these fault conditions any electrical equipment, including an SPD, may be
subjected to voltages which exceed their designed ratings. This information is being provided to the user so that an
informed decision can be made before installing any electrical equipment on an ungrounded power system.
MERSEN USA Newburyport-MA, LLC
374 MERRIMAC STREET — NEWBURYPORT, MA 01950
T 978 462 6662 — F 978 462 0181 — info.nby@mersen.com
ep.mersen.com
I
NSTALLATION
INS-270386 Rev (-)
I
NSTRUCTIONS
STZ
(E
SERIES
NGLISH
)
1
Need help?
Do you have a question about the Surge-Trap STZ series and is the answer not in the manual?
Questions and answers