Advertisement
INSTRUCTION MANUAL
NEO 1200
NEO 1200
SPA CONTROL SYSTEM
The new standard
in Spa Control.
NEO 1100 CONTROL PANEL
2200 E. Sturgis Road, Oxnard, CA 93030 • Phone 805.981.0262 • Fax 805.981.9403
C: 1.02
810-1980.1218
waterway@waterwayplastics.com • www.waterwayplastics.com
NEO 1000 CONTROL PANEL
Designed,
Engineered &
Manufactured
in the USA.
©2018 Waterway Plastics
Advertisement
Table of Contents
Related Manuals for Waterway NEO 1200
Summary of Contents for Waterway NEO 1200
- Page 1 INSTRUCTION MANUAL NEO 1200 NEO 1200 SPA CONTROL SYSTEM The new standard in Spa Control. NEO 1100 CONTROL PANEL NEO 1000 CONTROL PANEL Designed, Engineered & Manufactured 2200 E. Sturgis Road, Oxnard, CA 93030 • Phone 805.981.0262 • Fax 805.981.9403 in the USA.
- Page 2 SPA CONTROL SYSTEM SAVE THIS MANUAL PLEASE MAKE IT AVAILABLE TO ALL OTHER SPA USERS WARNING! Qualified Technician Required for Service and Installation BASIC INSTALLATION AND CONFIGURATION GUIDELINES • Use minimum 6AWG copper conductors only. • Readily accessible disconnecting means to be provided at time of installation. •...
-
Page 3: Main Screen
NEO 1000 CONTROL PANEL NEO 1100 CONTROL PANEL INSTRUCTIONS APPLY TO BOTH NEO 1100 & NEO 1000 CONTROL PANEL ICONS & FUNCTIONS RETURN 12:34 pm DOWN LIGHT 104°F MENU JET 1 JET 1 MAIN SCREEN: 12:34 pm The main screen displays current time, water temperature, and status of the system accessories. -
Page 4: Priming Mode
PRIMING MODE: Priming Mode When power is ON, the system will enter priming mode with ‘Priming Mode’ displayed on the panel. In this mode, all devices such as JETS, BLOWERS or LIGHTS are operable. JETS can be turned on and off to prime the pump. -
Page 5: Panel Timeout
SELECTION ICONS: FILTER CYCLE 1 ENERGY SAVING HEAT MODE OZONE ON FILTER CYCLE 2 VACATION HEAT MODE JET ON LOW SPEED FILTER CYCLE 3 CLEANER CYCLE JET ON HIGH SPEED FILTER CYCLE 4 POLLING CYCLE SPECIAL TEMP SELECT LIGHT ON TEMPERATURE LOCK HEATER ON PANEL LOCK... -
Page 6: Settings Explained
SETTINGS EXPLAINED: • ROTATE VIEW: Rotate the view 180 degrees. The UP and DOWN buttons also swap when rotated. • With ROTATE VIEW highlighted, press MENU to enter ROTATE VIEW setting. Use UP/DOWN to select desired setting and RETURN to confirm the setting and exit. •... -
Page 7: Error Screens
ERROR SCREENS: Error caused when SENSOR 1 and Plumbing Error Sensor 1 Fault SENSOR 3 have been plugged in incorrectly. Swap the SENSOR 1 and SENSOR 3 plug in controller to correct this problem. Check SENSOR 1 connection. Press RETURN to clear Press RETURN to clear Error caused by no water flow through heater Insufficient Flow... -
Page 8: Wiring Diagram
WIRING DIAGRAM 777-WW00110...
Need help?
Do you have a question about the NEO 1200 and is the answer not in the manual?
Questions and answers
replaced thermal sensor... filled tub and energized. display #3 error code shows up can scroll but cannot get any other functions