Display Settings - Sharp DV-S1U Operation Manual

DISPLAY SETTINGS

1
Press the SETUP button in STOP mode.
¡ The setup screen will appear.
SET-UP
1.LANGUAGE
2.DISPLAY
3.AUDIO
4.PARENTAL
2
K / L
Press the
and then press the ENTER button.
SET-UP
1.LANGUAGE
2.DISPLAY
3.AUDIO
4.PARENTAL
3
K / L
Press the
then press the ENTER button.
TV ASPECT
(Default : 4:3 LETTER BOX)
4:3 LETTER BOX : Wide screen with black bars on top
and bottom
4:3 PAN & SCAN : Full height picture, trimmed both
sides
16:9 WIDE : If wide screen TV is connected
SET-UP
DISPLAY CONTROLS
1.TV ASPECT 4:3 LETTER BOX
2.PANEL DISPLAY BRIGHT
3.ANGLE ICON ON
4.AUTO POWER OFF ON
PANEL DISPLAY
(Default : BRIGHT)
Adjust the brightness of the display of the unit.
* Auto: Stays dim only during playback.
SET-UP
DISPLAY CONTROLS
1.TV ASPECT 4:3 LETTER BOX
2.PANEL DISPLAY BRIGHT
3.ANGLE ICON ON
4.AUTO POWER OFF ON
buttons to select DISPLAY
buttons to select an item, and
SET-UP
DISPLAY CONTROLS
PANEL DISPLAY
1.BRIGHT
2.DIMMER
3.AUTO
ANGLE ICON (Default: On)
Display or not display the Angle icon on the screen.
SET-UP
DISPLAY CONTROLS
1.TV ASPECT 4:3 LETTER BOX
2.PANEL DISPLAY BRIGHT
3.ANGLE ICON ON
4.AUTO POWER OFF ON
AUTO POWER OFF
Set or not set to turn off after the screen saver is started and
no keys are pressed for 35 minutes.
SET-UP
DISPLAY CONTROLS
1.TV ASPECT 4:3 LETTER BOX
2.PANEL DISPLAY BRIGHT
3.ANGLE ICON ON
4.AUTO POWER OFF ON
4
K
Press the
item, and then press the ENTER button.
5
Press the SETUP button.
¡
The setup mode will be canceled and the ordinary
screen will appear.
Note
¡ Be sure to press the SETUP button, or the setting
will not work.
¡
You can also choose the item by pressing the num-
bers.
¡ You can change the PANEL DISPLAY setting
(BRIGHT or DIMMER) by pressing the DIMMER
button on the remote control.
– 25 –
(Default: On)
/ L
buttons to select a desired
EN
9F21