Blue Screen - Sharp 27F541 XFlat Operation Manual

Set Up (Continued)
6
Press MENU to exit.
When the BLUE SCREEN is set to "ON"
No signal
Note:
• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN "OFF".
• While INPUT 1, 2, or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if
BLUE SCREEN is turned on.
32
27F541

Blue screen

32
Power turns off
automatically
after 15
minutes
Standby mode