Advertisement
Table of Contents
- 1 Transmitter Module Installation Procedure
- 2 Slide the Bottom Portion of the Cabinet up
- 3 Remove the Connector Cover from the Pumphouse
- 4 Insert the Module into the Left Side of the Pumphouse
- 5 Load the Dispenser with the Appropriate Product Refill if Needed
- 6 Wait 5 Seconds for a Flashing Green LED
- Download this manual
8 Series (ES8, CS8, CB8) Activity
Transmitter Module Installation Procedure
Compliance Statement (FCC part 15.19):
!
This device complies with Part 15 of the FCC rules.
Operation is subject the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Caution (Pertaining to FCC part 15.21):
!
Modifications to this equipment not expressly approved by GOJO Industries, Inc. could void the user's authority
to operate the equipment.
Compliance Statement/Déclaration de Conformité (IC):
!
This device complies with Industry Canada's license-exempt RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) L'appareil ne doit pas produire de brouillage, et
(2) L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
This unit is certified to FCC Part 15 Part C for intentional unlicensed radiators.
Monitoring System
FCC ID: 076-T6SG0910A
IC: 10391B- T6SG0910A
Advertisement
Table of Contents
Related Manuals for Gojo 8 Series
Summary of Contents for Gojo 8 Series
- Page 1 (2) This device must accept any interference received, including interference that may cause undesired operation. Caution (Pertaining to FCC part 15.21): Modifications to this equipment not expressly approved by GOJO Industries, Inc. could void the user's authority to operate the equipment. Compliance Statement/Déclaration de Conformité (IC): This device complies with Industry Canada’s license-exempt RSSs.
- Page 2 Slide the bottom of the Press both cabinet latches to release the bottom cabinet down to expose portion of the cabinet. the pumphouse. Insert the module into the left side of the Remove the connector pumphouse, pushing the front face until the cover from the pumphouse.
Need help?
Do you have a question about the 8 Series and is the answer not in the manual?
Questions and answers