1. Manuals
  2. Brands
  3. Mocka Manuals
  4. Bicycle
  5. Mocka
  6. Assembly instructions

Mocka Assembly Instructions

Balance bike
Hide thumbs
1
2
3

Advertisement

Table of Contents

Enlarged version
Mocka Balance Bike
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
steering axle
x1
Mocka Balance Bikes are designed for children aged 2-6 years.
These bikes should not be used on public roads or near traffic.
Wearing a helmet is advisable. Only one child at a time should use
the bike. Recommended for children under 35kgs.
Adult supervision is strongly recommended at all times. Ensure your
child is confident at braking and is aware of road rules & safety. An
adult should assemble and maintain the bikes to ensure safety. All
screws, steering and axles must be checked by an adult before use.
Please keep your bike protected from water and moisture. Due to the
wooden nature of the bike, they should not be left outside for long
periods of time and should be dried down after use. We recommend
storing your bike inside when not in use. Clean with a damp cloth - do
not use chemical spray cleaners.
mocka.co.nz | mocka.com.au
B
long screw
Allen key
x2

Hardware Supplied

C
x2
ALL nuts and bolts must be checked and tightened
before first use. Regularly check all screws are
tight to ensure safety.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mocka and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Mocka Mocka

Summary of Contents for Mocka Mocka

  • Page 1: Assembly Instructions

    Allen key Hardware Supplied Mocka Balance Bikes are designed for children aged 2-6 years. These bikes should not be used on public roads or near traffic. Wearing a helmet is advisable. Only one child at a time should use the bike.
  • Page 2 Assembly Instructions Fork Frame The Mocka Balance Bike has been pre-assembled already. The seat is Connect the frame and fork using the steering axle rod (A). Slide the rod in the lowest position for a beginner rider. To complete the assembly down into the central hole in the top and through the end of the frame.
  • Page 3 Mocka Balance Bike Assembly Instructions Using the two long screws (B) attach the handle bars to the top of the Use allen key (C) to release and re-tighten the pre- assembled bolts to steering section.Tighten both screws securely with the allen key (C).

Table of Contents