Related Manuals for Qtx SURGE
Summary of Contents for Qtx SURGE
- Page 1 SURGE DERBY + LASER/UV/STROBE EFFECT Item ref: 151.597UK User Manual Version 1.0 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
- Page 2 Introduction Thank you for choosing the SURGE effect light as part of your light show. This compact fixture is a complete lighting effects solution in a single fixture, featuring LED Derby with Strobe, UV and Red/Green Laser functions, all controllable from DMX, internal or remote control.
-
Page 3: Rear Panel
DMX output Internal Settings Using the four control panel buttons (2), the SURGE can be set to various modes. Press the MENU button to display the different functions (see table below). Use the UP/DOWN arrow buttons to make your selection and press the ENTER button to [enter] a value or confirm the selection. -
Page 4: Stand-Alone Operation
As supplied, the remote handset has a clear plastic tab inserted which should be removed to activate the CR2025 button cell. Point the handset toward the front of the SURGE unit at a range of no more than 5m for remote control. - Page 5 DMX mode (9 channels) Channel Value Function 000-009 UV LEDs off 010-255 UV LEDs on 000-009 White LEDs off 010-255 White LEDs on 000-009 Derby effect off 010-044 Derby effect red 045-079 Derby effect green 080-114 Derby effect blue 115-149 Derby effect red + green 150-184 Derby effect green + blue...
-
Page 6: Specifications
Specifications Power supply 100-240Vac, 50/60Hz (IEC) Power consumption max. Fuse T2A/250V Operating temperature 45°C max LED power 8 x 3W Derby, 2 x 3W strobe, 8 x 3W UV LED colour 2 Red, 2 Green, 2 Blue, 2 Yellow, 2 White, 8 UV Laser power 80mW Red (650nm), 30mW Green (532nm) DMX channels...