Focon Showtechnic Expolite led22385 User Manual page 27

Choose Run Mode
MENU
RUN
PERSON
The operating mode is set in menu RUN. For operation on a DMX-controller DMX needs to be
set. SLAV sets the fixture into slave mode.
Edit User Programs
MENU
HSIC EDIT
In the menu EDIT the user programs PR.C1 to PR.10 can be edited.Every program can have up to
30 steps (SC.01-SC.30). Every step persists of the parameter colours RGBW (R./G./B./W.), Zoom (Z.)
STROBE (S.)„0-20Hz", TIME (T.) and FADE (F.). User programs can be transfered to other fixtures
(see master/slave).
Step-by-step programming of the custom stand-alone programs with up to 30 different steps.
NOTE: For less than 30 steps the TIME (T.) and FADE (F.) of the last step needs to be set to 0.
Example for time settings of a stand-alone programm with 3 steps:
HSIC DMX
HSIC SLAV
PR.C1
SC.01
PR.C2
SC.02
o o
o o
o o
PR.10 SC.30
Step 1 T. = 4 F. = 3
Step 2 T. = 5 F. = 2
Step 3 T. = 0 F. = 0
E-27
R.(0 - 255)
G.(0 - 255)
B.(0 - 255)
W.(0 - 255)
Z.(0 - 255)
S.(0 - 20)
T.(0 - 255)
F.(0 - 255)