Inspired by drive trotter TR-1200 Owner's Manual

Mobility chair

Advertisement

lifetime limited
warranty
Limited lifetime warranty on frame and cross braces.
One year limited warranty on other components.
Your
Inspired by Drive
be free of defects in materials and workmanship for the
lifetime of the original consumer purchaser.
This device was built to exacting standards and care-
fully inspected prior to shipment. This Lifetime Limited
Warranty is an expression of our confidence in the mate-
rials and workmanship of our products and our assur-
ance to the consumer of years of dependable service.
This warranty does not cover device failure due to owner
misuse or negligence, or normal wear and tear. The
warranty does not extend to non-durable components,
such as rubber accessories, casters, and grips, which are
subject to normal wear and need periodic replacement.
This warranty does not cover damage resulting from
transit use or from exceeding weight limit for user plus
items carried.
If you have a question about your
device or this warranty, please contact an authorized
Inspired by Drive
dealer.
brand product is warranted to
Inspired by Drive
®
trotter
mobility chair
TR-1200, TR-1400, TR-1600 & TR-1800
Rev.3.9.28.17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the trotter TR-1200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Inspired by drive trotter TR-1200

  • Page 1 Limited lifetime warranty on frame and cross braces. One year limited warranty on other components. Your Inspired by Drive brand product is warranted to be free of defects in materials and workmanship for the lifetime of the original consumer purchaser.
  • Page 2: Operating Instructions

    features figure 1 A. UNFOLDING (Fig 1) 1. Unhook closure strap. 2. Place chair in the upright position, hold one push handle (A) and press firmly on the seat rail (B) on the opposite side. 3. Press down the seat rail until the chair is completely open.
  • Page 3: Transit Options

    B. WHEEL LOCKS (Fig 3) D. FOLDING (Fig 3) 1. To engage, pull both wheel lock levers (A) back until 1. Engage wheel locks (A). Remove the child from the the locking bar pushes into the wheel and the lever chair.
  • Page 4: Seat Depth Adjustment

    To Adjust The Back Angle: 1. To adjust the back angle, relative to the seat, consult the Set-up Matrix. 2. To relocate the back post along the seat rail, loosen and remove bolts (Fig 4A & Fig 5D) from both sides of the seat and align the back posts along the seat rail in the required location.
  • Page 5: Footrest Adjustments

    FIVE POINT “H” HARNESS & PELVIC BELT ADJUSTMENT FOOTREST ADJUSTMENTS 1. Place user in the chair and position child’s hips. To Adjust Or Remove Footrest: 2. Buckle the pelvic positioning belt to the proper position. 1. Pull out the locking pin (Fig. 8A). 3.
  • Page 6: Crutch Strap Depth Adjustment

    To Modify the Range of Adjustment by Inverting the Depth Adjustment Footrest Extension Tube 1. Loosen both fasteners on the footplate (Fig. 12A). 1. Remove the footrest. 2. Slide the footplate to the desired position. 2. Remove the cap head screw (Fig 10A) from the foot 3.

This manual is also suitable for:

Trotter tr-1400Trotter tr-1600Trotter tr-1800

Table of Contents