Interlace - NAMCO SOUL CALIBUR II Manual

6-2-4

Interlace

Interlace Mode:
Non-Interlaced Mode:
1 Ensure that the Colour Edit Adjustment Box is showing. (Press P1 Button 3
if the Adjustment box is not displayed.)
2. Use the Joystick LEFT/RIGHT to change Interlace/Non Interlace.
DISPLAY TEST
Interlace check
P r ev i o u s C o l o r
EXIT color edit
NEXT
EXIT
Interlace mode is set ON
DISPLAY TEST
Interlace check
P r e v i o u s C o l o r
EXIT color edit
NEXT
EXIT
Interlace mode is set OFF
3. When the adjustment has been made, press P1 Button 1 to step back to the
Colour Edit Test or P1 Start Button to return to the Main Test Menu screen.
This mode provides more detailed and smoother graphics
than the non-interlaced mode. This is achieved by shifting
the picture display a half line in the vertical direction every
other frame scan, so doubling the vertical resolution without
changing the horizontal/vertical frequency.
Use this display if the interlace mode results in flicker over
the entire screen display. In the non-interlaced mode, there is
no shift of the display position, and the display remains
constant every time.
> Interlace
Contrast : 150
Bright R : 100
Bright G : 100
Bright B : 100
: P1-Button4
: P1-Button3
: P1-Button1
: P1-Start
> Non Interlace
Contrast : 150
Bright R : 100
Bright G : 100
Bright B : 100
: P1-Button4
: P1-Button3
: P1-Button1
: P1-Start
Page 19
Interlace mode
Reset Colour Edit values to factory defaults
Colour Edit ON /OFF
Select next test pattern
Return to test menu screen
Interlace mode
Reset Colour Edit values to factory defaults
Colour Edit ON /OFF
Select next test pattern
Return to test menu screen