Positioning The Boom - Plantronics DuoSet H141 User Manual

OVER-THE-HEAD-CONFIGURATION
If already in place, remove the Pivot Ball Ring
Hook .
Press the Ear Cushion and Rubber Ring
Assembly . Align the notch in the ring with the Voice
Boom .
Snap the ball on the end of the Headband
on the rear of the Headset Assembly
Place the Headband
Ear Cushion
positioned above the opposite ear.
If the headband is too tight or too loose, grasp the metal part
of headband and gently bend in the middle. The headband
length may be adjusted for fit and comfort.

POSITIONING THE BOOM

If you have the Voice Tube version of the product, pull out,
push-in, rotate, or swivel the Voice Boom
near the corner of your mouth that best transmits your voice.
If you have the Noise-Cancelling version of the product,
position the tip of the Voice Boom
your mouth as you comfortably can.
over the top of your head, with the
resting gently against your ear and the T-Bar
and Ear
onto the Headset
into the socket
.
into a position
as near to the corner of
3
B
A
A
E
F
G
H