Sharp MD-MT80H Operation Manual page 34

Titling a MiniDisc (continued)
„ To add characters
1
Put the unit in the character input mode.
(Perform steps 1 - 2 on page 32.)
2
Press the VOL+ or VOL- -- button to move
the cursor to the right of the character,
where you want to add a new character.
3
Select the character to add.
(Perform steps 3 - 4 on page 32.)
4
Press the ENTER/SYNC button.
5
Press the EDIT button.
6
"TOC" will be displayed. To write the up-
dated contents to the MiniDisc, press the
/:OFF button.
You cannot remove the MiniDisc whilst "TOC" is
displayed. "TOC" will not disappear until the record-
ed contents have been updated.
34
Web-site: www.sharp.co.uk/support
„ Stamping titles from another MiniDisc
Before stamping
When there are 2 MiniDiscs on which the same tracks
are recorded, you can transfer the character information
(disc and track names) of the Master MiniDisc to another
MiniDisc (for stamping).
1. What is a master MiniDisc?
A recordable MiniDisc that contains tracks and charac-
ter information. (You cannot transfer the information
from a playback only MiniDisc.)
2. What is a MiniDisc for stamping?
A MiniDisc that contains the same tracks in the same or-
der as the master MiniDisc. (Make sure that the total
number of tracks of the master MiniDisc and the one for
stamping are the same.)
Help Line: 08705 274277 (office hours)