Software Update - Sharp BD-HP20U Operation Manual

SOFTWARE UPDATE

This function allows software updates by
inserting a USB memory device with the update
fi le into the SERVICE terminal on this player.
Regarding how to obtain the software
update fi le, please call 1-800-BE-SHARP.
CAUTION
• Do not remove the USB memory device or
unplug the AC cord while the software is
being updated.
1
Insert the USB memory device with
the update fi le into the SERVICE
terminal on rear of this player.
2
Press SETUP to display the SETUP
MENU screen.
3
Press a/b/c/d to select
"SETTINGS", then press ENTER.
4
Press a/b to select "SOFTWARE
UPDATE", then ENTER.
• If you already set the password, go to
step 6.
MENU [SOFTWARE UPDATE]
AUDIO VIDEO SETTINGS
SPEAKER SETTINGS
QUICK START
AUTO POWER OFF
AQUOS LINK
PLAYBACK SETTING
FRONT DISPLAY / LED
VERSION
SOFTWARE UPDATE
SYSTEM RESET
5
Enter the 4-digit number using 0-9.
ENTER 4-DIGIT PIN CODE
6
Press ENTER to start checking data
in the USB memory device.
INSERT USB MEMORY DEVICE CONTAINING
THE SOFTWARE UPDATE FILE.
OK
7
During the data checking,
"Checking" blinks.
NOW CHECKING THE DATA IN USB MEMORY DEVICE.
CHECKING
• The current version of this unit software
and the version of the update fi le on
the USB memory device are displayed.
To update this player software with
update fi le, select "YES", and press
ENTER.
SOFTWARE UPDATE FILE IS DETECTED
IN THE USB MEMORY DEVICE.
START UPDATE?
CURRENT VERSION
UPDATE VERSION
YES
• If the USB memory device is not
properly installed or the correct update
fi le cannot be found on the USB
memory device, an error message is
displayed.
Check the fi le on the USB memory
device, and then reinsert the USB
memory device correctly.
SOFTWARE UPDATE FILE IS NOT DETECTED
IN THE USB MEMORY DEVICE.
CONFIRM THAT YOU HAVE TRANSFERRED THE FILE
TO THE USB MEMORY DEVICE AND RETRY SOFTWARE UPDATE.
OK
THERE IS MORE THAN ONE SOFTWARE FILE
IN THE USB MEMORY DEVICE.
CONFIRM THAT ONLY THE SOFTWARE UPDATE FILE IS
IN THE USB MEMORY DEVICE.
OK
SETTINGS
**1234567
**1234567
NO
45