SIM7000E NB-IoT HAT User Manual
4.
GNSS Debugging
4.1.
General AT commands
Commands
AT+CGNSPWR
AT+CGNSTST
AT+CGNSINF
4.2.
GPS Debugging
1)
Connecting the GPS antenna, and place the receiver on open area outdoor
AT+CGNSPWR=1
2)
3)
AT+CGNSTST=1
// Start to sending data received to AT Port
Open u-center and set the Port and Baudrate(AT Port, COM25).
Of course, you can use another port(NMEA Port,COM27)
4)
AT+CGNSTST=0
// Stop sending data received to UART
AT+CGNSINF
// Print the GPS information
5)
AT+CGNSPWR=0
6)
Rev1.0 June 8, 2018
GNSS Power Control:
AT+CGNSPWR =1:Turn on
AT+CGNSPWR =0:Turn off
AT+CGNSTST=1:Send data received to AT Port
AT+CGNSTST=0: Stop sending data received to AT Port
GNSS navigation information parsed from NMEA sentences
//Turn on power of GPS
//Turn off power of GPS
Description
share awesome hardware
Return
OK
OK
+CGNSINF:
OK
12