Care Of Patches' Fur - Robotronics Patches & Pumper Operating Manual

General maintenance of your robot should include caring for the robots fur. After
each use, clean and brush the robot's fur and clothing so the oils and dirt do not become
permanent. This may be done with a cloth or brush. Keep the robot covered when not in
use to keep dust and dirt off and to protect the fur and clothing. A good idea is to have two
people operate the robot. One to operate it and the second to help people interface with the
robot. This person can protect the robot from sticky fingers, dirty shoes, ball point pens, etc.
This person can pass out stickers, flyers, and help give your safety presentation. The
following is a list of specific ways to care for the fur:
1. Brush the fur regularly with a soft brush, or white terry cloth towel to avoid matting over
time. This will help to keep it clean and looking fresh and new. Be careful to be gentle,
excess friction may cause excess wear.
2. For regular cleaning maintenance use a damp soft cloth and warm water. A drop or two
of mild liquid detergent in the warm water before applying it with a damp cloth should
remove most skin oils and other dirt buildup. Do not get the robot wet! Brushing the
fur gently with a damp cloth should remove most dirt buildup. Then rub gently with a soft
dry towel and brush the fur dry.
Chapter 12 Maintenance: Fur Care
FUR CARE
39