Advertisement
Calibration Procedure
OPEN, SHORT and LOAD calibration must be performed for measurements with B-SMC or B-WIC.
For the calibration, we recommend using the OMICRON Lab calibration objects delivered with the
adapters. The pictures on this page show how to set up the adapters for each calibration step.
B-SMC
Impedance test adapter for surface mount components
B-WIC
Impedance test adapter for through-hole type components
* use the adjusting nut of the B-SMC to ensure the correct distance
(same as DUT size) between needle and plate for the OPEN calibration.
Contact:
www.omicron-lab.com
support@omicron-lab.com
OPEN*
SHORT
OPEN
SHORT
LOAD
LOAD
© OMICRON Lab
V3 - 1703
ENU 1183 03 02
Advertisement
