Elite Window Fashions Panel Track Shades Installation Instructions Manual

Step 5. SHADE OPERATION
Pull gradually and gently on the cord to draw the panels open and closed.
Step 6. SAFETY
Canadian safety regulations for window coverings requires the use of a cord tensioner on
all continuous loop chain systems. The use of such a device is intended to significantly
reduce the occurrence of infant or small child strangulation injuries or deaths resulting from
the looped pull chains on various window treatment products. The cord tensioner is
pre-installed on the lift chain during manufacturing. The tensioning device should be
mounted in the proper position to pull the chain taut in order to reduce the possibility of
injuy. Please see separate Chain Tensioner installation manual for proper
Panel Track Shades
installation.

Installation Instructions

CLEANING AND CARE
Fabrics may be feather dusted or vacuumed at a low suction setting. Spots or stains can
be rubbed clean with a damp sponge and mild soap. To avoid discoloration of the material,
we recommend against the use of chemical cleaners or abrasives. If necessary, the
shading may be ultrasonically cleaned by a professional.
www.elitewf.com
customerservice@elitewf.com
1-800-387-3566 © 2014 Elite Window Fashions