Quick Review - Sharp VL AH 50 H Operation Manual

3
Press the REC START/STOP button to
begin recording.
• The picture and sound fade in with the
selected fade mode.
4
Press the REC START/STOP button at
the point where you wish to stop
recording.
• The picture and sound fade out as the
screen gradually turns white. The
VIEWCAM then returns to Recording
Standby mode.
To cancel Fade mode
Press the FADE button
To use fade out only
1
During recording, press the FADE button
(B) on the screen.
2
Press the REC START/STOP button at
the point where you wish to stop
recording.
HA PPY B I R THDAY ! HA P A PPY B I R THDAY !
F ADE F ADE
E X - E X - E X P I C P I C GAMA GAMA GAMA Q K Q K Q K
T E ND T E ND E F F E F F FADE FADE FADE E F F E F F REW REW RE
F ADE F ADE OUT OUT
E X - E X - P I C P I C GAMA GAMA Q K Q K
T END T END E F F E F F FADE FADE E F F E F F REW REW
(B) .

Quick Review

The quick review function lets you check the
last 5 seconds of tape just recorded without
switching to VCR mode, to make sure that the
recording has come out right.
1
In Recording Standby mode, press the
MENU button until
2
Press the QK. REW button ( ).
• The tape rewinds to the point of 5
seconds before the current tape position;
playback then starts automatically.
Q K
REW
After 5 seconds of playback, the
VIEWCAM enters the Recording Standby
mode.
appears.
E X -
P I C GAMA QK
T END FADE
E F F E F F REW
1 5
E X - P I C GAMA Q K
T E ND E F F FADE E F F REW
30