Subscribe to Our Youtube Channel
Related Manuals for Kunbus cRIO PN C Series
Summary of Contents for Kunbus cRIO PN C Series
- Page 1 cRIO PN – C SERIES Module for PROFINET IO Slave Installation Instructions V0.3/12.05.2017 cRIO PN-Installation- V0.3/12.05.2017...
- Page 2 Revision History Version Date Description Resp. V0.3 12.05.2017 Changed to Kunbus corporate Identity V0.2 10.06.2015 Ambient temperature changed to 0 - +50°C V0.1 03.02.2011 Initial Version KUNBUS GmbH Heerweg 15c 73770 Denkendorf Phone +49 711 300 20 676 +49 711 300 20 677 Copyright ...
-
Page 3: Table Of Contents
LEDs and Connectors ....................3 Position of LEDs and Connectors ................ 3 LED's ........................4 Power connector ....................4 Technical Data ......................5 Use in hazardous locations .................. 5 CE- Conformity Declaration ..................6 cRIO PN-Installation-V0.3/12.05.2017 Business Confidential/KUNBUS Proprietary... - Page 4 Contents Installation Instructions List of Figures Figure 1: cRIO PN module ..................... 2 Figure 2: LEDs and connectors ....................3 cRIO PN-Installation-V0.3/12.05.2017 KUNBUS Business Confidential/KUNBUS Proprietary...
- Page 5 Installation Instructions Contents List of Tables Table 1: Meaning of the LEDs ....................4 Table 2: Power requirements ....................4 Table 3: Technical Data ......................5 cRIO PN-Installation-V0.3/12.05.2017 Business Confidential/KUNBUS Proprietary...
- Page 6 Contents Installation Instructions Blank page cRIO PN-Installation-V0.3/12.05.2017 KUNBUS Business Confidential/KUNBUS Proprietary...
-
Page 7: Safety Information
60204/VDE 0805-1. Only protective IEC 61340-5-1 and IEC 61340-5-2. extra-low voltages according to the defined standards may be used to supply. Housing Only staff authorized by KUNBUS is permitted to open the housing. cRIO PN-Installation-V0.3/12.05.2017 Business Confidential/ Proprietary... -
Page 8: Installation Of The Module
Installation of the Module Installation Instructions 2 Installation of the Module The cRIO PN module is a PROFINET IO Device module for National Instruments CompactRIO system. The configuration entirely takes place by means of the delivered software. Thus, no jumpers or DIP-switch adjustments are necessary. To mount the module in the CompactRIO system, please proceed as follows: ... -
Page 9: Leds And Connectors
Installation Instructions LEDs and Connectors 3 LEDs and Connectors 3.1 Position of LEDs and Connectors SF – System Fault LED PWR - Power indication LED SPI - Activity LED BF - PROFINET Fail LED Port 2 – RJ 45 Profinet IO Power –... -
Page 10: Led's
LEDs and Connectors Installation Instructions 3.2 LED's Colour State Function Green No power supply connected Power supply connected Green SPI bus not active SPI bus active No system fault active System fault active Possible reasons: SPI bus failure PROFINET Alarm active PROFINET O.K PROFINET Bus fail Possible reasons:... -
Page 11: Technical Data
Installation Instructions Technical Data 4 Technical Data Parameter Value Functionality PROFINET IO Device LLDP supported SNMP MIB2 Physical Device Max. 254 bytes input and 254 bytes output data 16 PROFINET IO slots supported Min. 1 mS cycle time with RT Min. -
Page 12: Ce- Conformity Declaration
CE- Conformity Declaration Installation Instructions 5 CE- Conformity Declaration cRIO PN-Installation-V0.3/12.05.2017 Business Confidential/ Proprietary... - Page 13 Installation Instructions CE- Conformity Declaration cRIO PN-Installation-V0.3/12.05.2017 Business Confidential/ Proprietary...
- Page 14 CE- Conformity Declaration Installation Instructions cRIO PN-Installation-V0.3/12.05.2017 Business Confidential/ Proprietary...
- Page 15 Information is subject to change without notice. Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patents Notice at ni.com/patents.
Need help?
Do you have a question about the cRIO PN C Series and is the answer not in the manual?
Questions and answers