Table of Contents
Advertisement
Quick Links
Quick Start Guide
This quick guide is intended to provide a brief overview of the main features and
operation of TPP Pipettor Turbo-Fix. For detailed information, please refer to the
Operating Instructions of TPP Pipettor Turbo-Fix that can be found at
several languages
Battery Charge
Plug in
Low Battery
Red Blink
General Speed Setting
155922_V00_QSG_TPP_Pipettor
.
Charge the battery completely before first use.
The supply voltage must meet the requirements of the mains
adapter: 100-240 VAC, 50/60 Hz.
Charging Battery
50 %
Speed
TPP Pipettor Turbo-Fix
~ 3.5 h
Red
100 %
Speed
www.tpp.ch
in
Charged Battery
Green
Plug in for Turbo
Speed
125 %
Turbo Speed
1/4
Advertisement
Table of Contents
Related Manuals for TPP Pipettor Turbo-Fix
Summary of Contents for TPP Pipettor Turbo-Fix
- Page 1 TPP Pipettor Turbo-Fix This quick guide is intended to provide a brief overview of the main features and operation of TPP Pipettor Turbo-Fix. For detailed information, please refer to the Operating Instructions of TPP Pipettor Turbo-Fix that can be found at www.tpp.ch...
- Page 2 Manual Speed Control Fast Slow Gravity Dispense Slow Fast Pump not running Pump running Pump running Filter Exchange Press (1) and turn 1/8 counter clockwise (2) Replace the filter Colored side facing upwards 155922_V00_QSG_TPP_Pipettor...
- Page 3 Safety Notes 1) Do not use or charge TPP Pipettor Turbo-Fix in an atmosphere with danger of explosion. Do not pipette highly flammable liquids such as acetone or ether. 2) Comply with the material safety data sheet (MSDS) and with all safety guidelines when handling dangerous substances.
- Page 4 155922_V00_QSG_TPP_Pipettor...
Need help?
Do you have a question about the Pipettor Turbo-Fix and is the answer not in the manual?
Questions and answers