Sharp AR-M237 IMAGERs Specifications page 2

AR-F14 Saddle-Stitch Finisher
Staple Section
Stapler Compiler
Offset Tray
Saddle-Stitch Tray
Front Panel
A R - F 1 4 F I N I S H E R S P E C I F I C AT I O N S
Name: Saddle-Stitch Finisher
Number of Trays: 2
Paper Output:
Face down (when using the offset tray)
Tray Types: Upper tray: Offset tray / Lower tray: Saddle-stitch tray
Tray Capacity: Upper tray:
Without stapling: 8-1/2" x 11"/(21 lbs.) 1,000 sheets max.
8-1/2" x 14"/(21 lbs) 500 sheets max.
Stapling: 8-1/2" x 11"/ (21 lbs) 30 sets, 1,000 sheets max.
8-1/2" x 14"/ (21 lbs.) 30 sets, 500 sheets max.
Lower tray (saddle stitch): Number of pages that can be
stapled:10 sets x 6-10 pages per set, or 20 sets x 1-5
pages per set
Paper Size: Upper tray: 11" x 17", 8-1/2" x 14",
8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"
Lower tray (saddle-stitch): 11" x 17", 8-1/2" x 11"R
Paper Weight: Upper tray: 16 lbs. to 54 lbs.
Lower tray (saddle-stitch): 16 lbs. to 28 lbs.
Paper Type: Upper tray: plain paper, heavy paper, letterhead paper,
recycled paper, color paper
Lower tray (saddle-stitch): plain paper, letterhead paper,
recycled paper, color paper
Paper Full Detection: Upper tray/lower tray (saddle-stitch): Yes
Offset Function:
Upper tray only
Design and specifications subject to change without notice.
Sharp is a registered trademark of Sharp Corporation.
All other trademarks and registered trademarks are
property of their respective holders.
CPD-3689
AR 2 3 7 AR
M M
Upper Release Cover
Allowed Paper Sizes
for Stapling:
Number of Pages
that can be Stapled:
Stapling Positions:
Saddle-Stitch Function:
Paper Feeding:
Power Supply:
Dimensions:
Weight:
A R - P N 1 B H O L E - P U N C H M O D U L E ( O P T I O N A L )
Number of Holes:
Page Sizes:
Sharp Electronics Corporation
Sharp Plaza, Mahwah, NJ 07430-1163
2 7 7
Animated Touch-Screen LCD Display
OUTPUT OFFSET
TRAY
1 2 3
SORT
1 2 3
1 2 3
1 2 3
STAPLE
SORT
2 2 2
GROUP
1 1 1
OFFSET
Center Cover
Finisher Release Lever
Upper tray: 11" x 17", 8-1/2" x 14",
8-1/2" x 11", 8-1/2" x 11"R
Lower tray (saddle-stitch): 11" x 17", 8-1/2" x 11"R
Stapler Compiler: 8-1/2" x 11": 50 pages/8-1/2" x 14"
or 11" x 17": 25 pages
Saddle-Stitch: 10 sheets maximum 8-1/2" x 11R", 11" x 17"
Upper tray: 3 positions (top left staple, two left staples,
lower left staple)
Lower tray (saddle-stitch): 4-23/32" pitch from center of paper
Copy mode/print mode with optional AR-P17 Controller
Center reference
From power unit of AR-M237/M277
28-1/32" (W) x 23-3/4" (D) x 40-3/64" (H)
(with two or four paper trays installed)
28-1/32" (W) x 23-3/4" (D) x 36-7/64" (H)
(with three paper trays installed)
Approx. 101.4 lbs.(finisher: 86 lbs., joint: 15.4 lbs.)
2 or 3
3 holes: 11" x 17", 8.5" x 11"
2 holes: 8.5" x 14", 8.5" x 11"R
1-800-BE-SHARP
www.sharpusa.com
OK
CENTER
TRAY
SADDLE
STITCH PUNCH