Game On Sport MEGAJUMP User Manual page 13

STEP 6:
Connect 2 parts steel tubes with foam protection to each other as shown in figure 1 and place the cover cap on the
upper part of the stand if needed.
Fig.1
STEP 7:
Fix the steel tubes from Fig 1 onto the trampoline base (See A1 and A2).
The steel bottom poles must be fixed to the base of the trampoline with the angle facing outwards, away from the
trampoline.
STEP 8:
Once the assembly has been completed correctly, the tubes should look like shown in figure B.
Figure B
A1 A2
Fixing the bottom tubes onto the trampoline
legs with two screw sets for each bottom tube
(2 bolts, spacers, washers and nuts). Tighten
bolts firmly.