Single Pass Feeder (Ar-Sp3); Part Names; Specifications; Using The Spf - Sharp AR-151 Operation Manual

SINGLE PASS FEEDER (AR-SP3)

The single pass feeder (SPF) holds up to 30 originals for automatic feeding.

Part names

Document feeder tray

Specifications

Acceptable originals
Power supply
Weight
Dimensions
As a part of our policy of continuous improvement, SHARP reserves the right to
make design and specification changes for product improvement without prior
notice. The performance specification figures indicated are nominal values of
production units. There may be some deviations from these values in individual
units.

Using the SPF

(1) Make sure that no original is left on the original table.
(2) Adjust the original guides to the size of originals.
(3) Set the originals face up in the document feeder tray.
Original guides
SPF exit area
Weight: 14 to 23 lbs.
Size: 5-1/2" x 8-1/2" to 8-1/2" x 14"
Capacity: Up to 30 sheets
Drawn from the copier
Approx. 6.6 lbs. (3 kg)
19.6" (W) x 15" (D) x 4.3" (H)
(498 mm (W) x 380 mm (D) x 110 mm (H))
Feeding roller cover
7
37