Table of Contents
Advertisement
MM series
Verify that all data written in the label of the device matches the data required for the
installation.
Verify that there is no mechanical stress or deformation due to installation in the tank.
Remove power supply and verify that no explosion risk is present before opening
cover of the housing and check that the cover of housing is correctly mounted before
applying power to the instruments MM...F series.
The installation of instruments in hazardous areas must be exclusively done by
trained people.
14.3 Protection against ESD (electro static discharges)
Instruments with plastic parts that can produce electro statics discharges have a
label for it.
It is important to follow some rules to avoid ESD:
- Avoid rubbing the device.
- Never clean the device dry.
- Do not install the device near material airflows or near steam outlets.
14.4 Chemical resistance
Ensure that the device construction materials have chemical resistance sufficient to
prevent mechanical deformations that may affect the device.
14.5 Maintenance and repairs
The instrument does not require maintenance or servicing.
Repairs must be only carried out by Kobold Mesura (manufacturer).
14.6 Storage
Measuring instruments should be protected against humidity and dust.
Storage temperature: -5...+55ºC
page 12
DT0593
Advertisement
Table of Contents
