Table Of Contents; System Information; Operation; Power On/Off - Lippert Components OCTP Owner's Manual

System Information
Operation
Power On/Off
Control Panel
System Operations
OneControl Resources
®
OneControl Assembly
®
OneControl Components

System Information

The OneControl® Touch Panel (OCTP) is a touchscreen device that provides system controls and monitoring
software for the recreational vehicle unit. The systems include slide-outs, leveling systems, awnings, lighting,
temperature, water tanks, tire pressure, battery levels and any other compatible systems installed on the
unit and programmed into the OneControl® system. Powering up the unit will also power the OneControl®
Touch Panel and the various controllers throughout the unit.

Operation

Power On/Off

1.
The device can be powered on or off using the button on the front of the device.
NOte: It will take a few moments to start up and load the system.
2.
To enter or exit sleep mode, press and release the power button.

Control Panel

1.
Locate OneControl® control panel (Fig. 1).
2.
Press the power button (Fig. 1A) to turn on the OneControl® Touch Panel.
3. Press the icon of the system to be operated; i.e., awning, bed lifts, generator, etc. (Fig. 2).
NOte: The control panel will show icons representing the devices connected to the OneControl® system.
Press the back button (Fig. 3A) at any time to return to the OneControl® home screen.
Rev: 12.21.18

tABLe OF CONteNtS

Fig. 1
A
Page 2
Fig. 2
CCD-0001440
2
2
2
2
3
10
13
14-19