Trademarks statement The term BODi rS is a trademark of Patton Electronics Company. All other trademarks presented in this document are the property of their respective owners. BODi rS BD1000 Series Bandwidth-on-Demand Internet Warranty, Trademark, &...
Page 2
B.2 CE Declaration of Conformity & GND or Hot, Neutral & Safety/Protective Ground), the wall outlet Patton Electronics, Inc declares that this device is in compliance with the essential requirements and other rele- (or socket) must have an earth ground.
Page 3
• Always follow ESD prevention procedures when removing and replac- www.patton.com ing cards. E-mail support: support@patton.com—answered within 1 business day • Wear an ESD-preventive wrist strap, ensuring that it makes good Telephone support: skin contact. Connect the clip to an unpainted surface of the chassis Standard: +1 (301) 975-1007 (USA), Monday–Friday: 8:00 am to 5:00 pm EST (1300 to...
Page 4
2.3 Connecting the USB Interfaces enables you to change the priority of the WAN connections off or on. For more information about configuring these connections, refer to Chapter 3 in the BODi rS BD1000 Series User Manual: (www.patton.com/manu- Do the following to connect USB cables (Standard-A plugs at both ends) between the BODi rS USB 2.0 ports and als/BD1000.pdf).