Safety Rules - Promax CV-100 User Manual

2 SAFETY RULES

*
The safety could not be assured if the instructions for
use are not closely followed.
*
Use this equipment only on systems or devices with the
measurement connected to negative ground potential or
isolated from the network.
*
Observe all specified ratings both of supply and
measurement.
*
Use this instrument under the specified environmental
conditions.
*
Remenber that voltages higher than 70 V DC or 33 V AC
rms are dangerous.
*
The user is not authorised to manipulate inside the
instrument:
Any change on the equipment should be carried out by
qualified personnel.
*
Use for the signal inputs / outputs, specially when working
with high levels, appropriate low radiation cables.
*
Follow the cleaning instructions described in the
Maintenance Paragraph.
11/10 - 3 - CV-100