Troubleshooting - Panasonic ES-LT5N Operating Instructions Manual

►Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
2. Align the foil frame mark (
system outer foil mark ( ) and securely
attach together until it clicks.
• The system outer foil cannot be reversely
attached.
• Always insert the system outer foil to the
foil frame when attaching to the shaver.
• Do not press the system outer foil
release buttons with excessive force.
Doing so may bend the system outer foil,
preventing complete attachment to the
foil frame.
►Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
►Replacement parts
Replacement parts are available at your dealer or Service Center.
Replacement parts for
ES‑LT5N/ES‑LT3N
ES-LT5N_3N_US.indb 15
) and the
System outer foil and inner
WES9015
blades
System outer foil WES9089
Inner blades WES9068

Troubleshooting

Perform the following actions.
If the problems still cannot be solved, contact the store where
you purchased the unit or a service center authorized by
Panasonic for repair.
Problem
The power switch does Unlock the switch lock.
not turn ON. (See pages 9 and 10.)
Shavings fly out in all This can be improved by cleaning
directions. every time after shaving.
Replace the system outer foil if it
System outer foil gets hot. is damaged or deformed.
(See this page.)
When the number of operations
Operating time is short
per charge starts to decrease, the
even after charging.
battery is nearing the end of its life.
The odor is getting This can be improved by cleaning
stronger. every time after shaving.
While the shaving sensor lamp
The driving sound glows, the shaving sensor is
changes while shaving. operating. The sound changes
depending on the beard thickness.
Action
15
2015/04/17 17:38:35