Twin Needle - Shark 7132L Instruction Manual

Twin needle
* The twin needle is an optionat accessory not
supplied with your machine.
-Turn stitch length diat to the desired stitch
length.
-Turn stitch selector to straight stitch, center
needle position, width setting "0".
Make sure that the two threads used to thread
the twin needle are of the same weight. You
can use one or two colors.
Insert the twin needle in the same way as
single needle. Flat side of needle should face
away from you.
Follow instructions for single needle threading. Thread each
needle separately.
[] Please note:
When sewing with twin need/e, a/ways proceed slow/y, and
make sure to maintain a low speed to insure quality stitching.
When using twin needle on zig-zag make sure the stitch width
dial is set between "0" and '2. 5". Do not use twin needle at
setting above '2. 5".
f----m
82