Summary of Contents for Juniper THIN Suspension
- Page 1 THIN Suspension Center Power Feed Remote Installation Guide SHOWN ARE EXAMPLES OF CONFIGURATION POSSIBLITIES. SPECIFIC FIXTURE CONFIGURATION MAY VARY.
- Page 2 END SLEEVES MOUNTED AT BOTH ENDS OF THE FIXTURE * In order to install the fixture with the canopy at either end of the fixture, please refer to "THIN Suspension Remote Installation Guide" or contact Juniper for instructions. POWER FEED OPTIONS...
- Page 3 THIN SUSPENSION INSTALLATION GUIDE STEP 2A: JUNCTION BOX COVER PLATE INSTALLATION INSTRUCTIONS Press the safety nut upwards to Unscrew pass aircraft cable through safety nut the gripper FIGURE 4 FIGURE 5 FIGURE 6 Remove gripper from the canopy Attach the crossbar to the junction box Partly loosen safety nut on cable gripper.
- Page 4 (recommended). fully assembled and desired suspension height is achieved. STEP 3: LIGHT TUBE INSTALLATIONS The THIN Suspension fixture is designed with an innovative magnetic connection. Simply insert the light tubes into their sleeves for electrical contact to be made. O-Rings...