Safety - Deighton FORMATIC Instruction Manual

1. Always disconnect mains supply before servicing, cleaning or changing the drum
2. Disconnect mains supply when removing drum and guard
3. The machine should not be run when the drum guard is removed
4. During operation the hopper guard can be opened to refill. This will automatically stop
the machine
5. When replacing the scraper wire remove the assembly from the machine. The machine
must be disconnected from the mains supply before removing assembly.
6. No attempt should be made to override the safety switches or run the machine without the
guards in place
7. Use a 13 amp fuse in the plug
Ensure all operatives read these instructions and are fully conversant with the machines
operations and safety procedures
These machines are to be operated by one person, in the case where an open hopper is used
the machine is to be isolated before any attempt is made to put hands in the hopper. The
machine is not to be operated when anyone is reaching into the hopper whether for cleaning,
blockages or any other reasons.

(6) SAFETY