Page 2
RECOMMENDED TOOLS Phillips Screwdriver Hex Wrench (supplied) Adjustable Wrench Channel Locks Teflon Tape Regular Screwdriver ROUGHING-IN DIMENSIONS INSTALL DIVERTER CAUTION Turn off water at main supply. Roughing-in dimensions are for reference. When finished tiling the wall, remove PLASTER 1-5/8" TO 3-1/4" FINISHED WALL (41mm to 83mm) GUARD (1).
Page 3
Figure 3. INSTALL TRIM Thread DIVERTER KNOB (1) onto diverter stem. Install HANDLE ADAPTER (2) onto VALVE STEM (3) and secure with Figure 1. Mount ESCUTCHEON HOLDER (1) SCREW (4). and gasket to valve body with SCREWS (2). Install end of CROSS HANDLE (5) into HANDLE ESCUTCHEON (6). Mount ESCUTCHEON SUPPORT (3) to Holding the CROSS HANDLE (5) together with HANDLE ESCUTCHEON (6) ESCUTCHEON HOLDER (1) with SCREWS (4).
Page 4
JADO will not be liable for labor or other costs relating to the sale, installation, or replacement of their products. In the event of a defect in any JADO product covered by this warranty, the product must be returned to the dealer where originally purchased JADO BATHROOM AND HARDWARE MFG.