Dukane 8142WISS User Manual page 4

Regulatory notices (continued)
Product label
The position of the label is shown in the drawing below.
Laser Aperture
• This projector is classified as a class 1 laser product that complies with
IEC60825-1:2014 and JIS C 6802:2014, and as a class 2 laser product that
complies with IEC60825-1:2007. Improper handling may cause injury. Be careful
of the following.
• If an abnormality occurs in the projector, turn it off immediately, unplug the power
cord from the outlet, and consult your dealer or service company. If you continue
to use it, it may cause not only electric shock or fire but also vision disorder.
• Do not disassemble or modify the projector. The projector has a high-power
laser device inside. It may cause serious injury.
• Do not look into the beam while projecting an image. Do not look into the lens
through optical devices such as magnifiers or telescopes. It may cause vision
disorder.
• Make sure that nobody is looking into the lens when you turn on the projector by
remote control away from the projector.
• Do not let children operate the projector. If children could possibly operate the
projector, they must be accompanied by an adult.
• Do not expose optical devices such as magnifiers or reflection mirrors to a
projected image. It may cause bad effects on the human body if you continue to
use it. It may also cause fire or accidents.
• Do not disassemble the projector when you dispose of it. Dispose of it according
to laws and regulations of each country or region.
CAUTION
►Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
4
As with any bright source, do not
stare into the direct beam,
RG2 IEC 62471-5:2015.
Laser evaluation standard:
IEC60825-1: 2007, IEC60825-1: 2014,
EN60825-1: 2014
LP-TW4001:
Internal Laser Specifications
Max. Output: 95W
Wave Length: 449 - 461nm
LP-TW3001:
Internal Laser Specifications
Max. Output: 71W
Wave Length: 449 - 461nm