(8.1) Tractor Pre-Operation Inspection/Service; (8.2) Mower Pre-Operation Inspection/Service - RHINO FM84A Operator's Manual

8.1 Tractor Pre-Operation Inspection/Service
Refer to the tractor operator's manual to ensure a
complete pre-operation inspection and scheduled
service is performed according to manufacturer
recommendations. The following is a partial list of items
requiring inspection:
Tire condition/air pressure
Wheel lug bolts
Steering linkage
PTO shield
SMV sign is clean and visible
Tractor's lights are clean and functional
Tractor Seat belt is in good condition
Tractor cab or ROPS is in good condition
ROPS is in the raised position
No tractor oil leaks
Radiator free of debris
Engine oil level and condition
Engine coolant level and condition
Power brake fluid level
Power steering fluid level
Fuel condition and level
Sufficient lubrication at all lube points
Air filter condition
8.2 Mower Pre-Operation Inspection/Service
Before each mower use, a complete inspection and service is required to ensure the mower is in a good and safe
working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To ensure the
mower is ready for operation, conduct the following.
Perform scheduled lubrication as detailed in the
maintenance section.
Ensure all decals are in place and legible.
Ensure the driveline is securely attached to tractor.
Make sure the driveline yoke locking collar is
securely seated in the grooves of the PTO shaft by
pushing and pulling the yoke several times.
Inspect that the 3-point hitch pins are the proper
size, correctly installed, and secured to the tractor
lift arms with retaining pins inserted.
FM84A 09/03
© 2004 Alamo Group Inc.
OPERATION
Operation Section 4-16