RHINO FM84A Operator's Manual page 101

When you get to the end of a pass, slightly raise the
mower (2-4") before turning. Never raise the mower
entirely while the blades are turning. If the mower must
be raised higher than 12" from ground level, disengage
the tractor PTO and wait for all mower rotation to come
to a complete stop before proceeding to raise the mower.
WARNING!
Do not let the Blades turn when the Mower Deck is raised for any
reason, including clearance or for turning. Raising the Mower
deck exposes the Cutting Blades which creates a potentially
serious hazard and could cause serious injury or even death from
objects thrown from the Blades.
Large, dense, or wet vegetation may need to be mowed
in two or more passes to achieve a uniform cut. In
such conditions, raise the cutting height to 12" or more
.
on the first pass
Then lower the mower to the desired height and mow
the vegetation a second time. If possible, select a
mowing pattern that is at a 90 degree angle to the first
pass to reduce streaking and provide a more even cut
FM84A 09/03
© 2004 Alamo Group Inc.
OPERATION
(SRM-7)
.
Operation Section 4-27