RHINO FM60/72 Operator's Manual page 16

Replace bent or broken blade with new blades. NEVER ATTEMPT TO STRAIGHTEN OR WELD
DANGER!
ON BLADES SINCE THIS WILL LIKELY CRACK OR OTHERWISE DAMAGE THE BLADE
WITH SUBSEQUENT FAILURE AND POSSIBLE SERIOUS INJURY FROM THROWN BLADES.
(SGM-10)
In addition to the design and configuration of this Implement, including Safety Signs and Safety Equipment,
hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper
training of personnel involved in the operation, transport, maintenance, and storage of the machine. Refer also to
Safety Messages and operation instruction in each of the appropriate sections of the Tractor and Equipment
Manuals. Pay close attention to the Safety Signs affixed to the Tractor and Equipment.
Servis-Rhino mowers use balanced and matched system components for blade carriers, blades, cuttershafts,
knives, knife hangers, rollers, drivetrain components, and bearings. These parts are made and tested to Servis-
Rhino specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The use of
"will fit" parts may reduce mower performance, void mower warranties, and present a safety hazard. Use
genuine Servis-Rhino mower parts for economy and safety.
FM6072 08/01
© 2004 Alamo Group Inc.
SAFETY
PARTS INFORMATION
SEE YOUR SERVIS-RHINO DEALER
Safety Section 1-10
(SG-18)
(SPRM-1)