Digital Cd Audio Extraction - Creative Audigy 2 ZS Platinum User Manual

Digital CD Audio Extraction

To enable this feature in Windows 98 SE, Windows Me or Windows 2000 (SP3) (Windows XP has this feature enabled), follow the steps
below:
In Windows 98 SE
1. Click Start -> Settings -> Control Panel.
Double-click the Multimedia icon. The Multimedia Properties dialog box appears.
Click the CD Music tab, and then click the Enable Digital CD audio for this CD-ROM device
check box to select it.
In Windows 2000 (SP3)/Me
1. Click Start -> Settings -> Control Panel.
Double-click the System icon. The System Properties dialog box appears.
Click the Device Manager tab.
Double-click the CD-ROM or DVD-ROM icon.
Double-click the name of your drive.
Click the Properties tab, and then click the Enable Digital CD audio for this CD-ROM
device check box to select it.
Note
On a fresh installation of Windows Me, you may not hear audio from your CD-ROM
drive even after enabling Digital CD Audio. To solve this, disable Digital CD Audio
and then restart the computer. When the system has restarted, re-enable Digital CD
Audio and restart the system again.