2, Operate with remote control
2.1 Assemble the battery and
connect with camera
Open the battery cover of the
remote control, then two AAA
batteries can be installed into
the remote control.
batteries
2.2 Photograph
Shortly press the [photograph button]
control, you will hear a buzz as [power indicator lamp]
flashes once. After that,the camera comes into 10-second
time-lapse mode,[photograph indicator lamp] on remote
control will flash slowly,shortly press [photograph button]
again to stop taking photograph .
2.3 Video-record
Shortly press the [camcorder button]
remote control, the buzzer will respond and [power
indicator lamp] will flash once as recording starts. During
the recording process, [camcorder indication lamp] on
the remote control will flash slowly. Shortly press [camera
button] again to end recording.
Switch on camera first,
then press any button on
the remote control to start
connecting, during this
process [power indicator
lamp] will flash slowly, and
then go off after the
connection is done.
on remote
on the