NOW YOU NEVER HAVE TO ASK… WHO’S THERE? HSDB1 QSG 00...
EASY SETUP WiFi doorbell Mount the doorbell camera camera with 1 faceplate to an existing doorbell installed 3 extra faceplate options Download the RCA Security App ~ 1.5 in Installation kit: Mounting template x2 Mounting screws x2 Mounting anchors Connect to Wi-Fi...
MOUNT THE DOORBELL CAMERA Turn off power to your doorbell’s circuit Drill holes for the doorbell camera Insert one of the drill bits Find the breaker that controls the in your drill—for masonry —OR— circuit for your doorbell. Turn it off or brick, use the larger drill Insert before you continue installation.
MOUNT THE DOORBELL CAMERA (continued) Connect the doorbell camera to home power Twist If your home’s doorbell power wires are NOT Check if your home’s doorbell power wires are long enough to Wire nut long enough: Wire connect directly to the terminals on the back of the doorbell leads camera.
DOWNLOAD THE RCA SECURITY APP Align the holes on the doorbell camera’s In the Google Play or Apple App Stores, search for “RCA body with the holes you drilled. DOORBELL CAMERA” and look for the icon shown here. Then download and install the App.
Create an App user name and password The first time you launch the RCA Doorbell Camera App, you’ll Connect the camera with your WiFi network need to create a user name and password so that you can access your camera securely.
WiFi network, then register it with the RCA + Make sure that Wi-Fi signal is 2.4GHz. The RCA Doorbell Camera does not support 5GHz WiFi. + Make sure that your WiFi router uses either WPA2-PSK/WPA-PSK or AES as its encryption Doorbell Camera server for extra security.
CUSTOMIZE AND USE! EVERYDAY USE Live View Launch the RCA Doorbell Camera App and press Start Install a faceplate Live View. Choose the included faceplate that you Who’s There? (Video Intercom) When a visitor rings the doorbell, want to use and place it over the doorbell you get a push notification on your phone or tablet.
TOUR OF THE SYSTEM: LIVE VIEW SCREEN (Back) goes back to the device list screen. (Micro-SD Card) accesses any content stored on the camera’s Micro-SD Card (pre-installed). Press this icon to start viewing or downloading motion/sound-activated videos or images from the camera’s Micro-SD Card.
TOUR OF THE DOORBELL CAMERA FRONT AND BOTTOM BACK Mic captures audio around the doorbell. Screw terminals 1 and 2 connect to the power Lens captures video in front of the doorbell. source from your home. IR light (behind panel) activates automatically for night vision.
Indicates a potentially hazardous situation, which if not avoided, could result in province to state/province. equipment damage, data loss, performance degradation, or unexpected results. Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury. HSDB1 NA Safety-Warranty 00...