Before First Use; Turbo Fan Heat Drying System; Installation - Beko DFN 1000 X User Manual

Beko dishwasher user manual
Table of Contents

Advertisement

If in doubt, contact the manufacturer of
the item.
Do not overload your dishwasher or
do not load items other than those
mentioned in this manual.
3

Before first use

After unpacking your dishwasher,
check the machine against any
possible transportation damage. Never
install and use damaged machines. If
your machine is damaged contact your
retailer. Always have your machine
installed by qualified electrician/
plumber to ensure correct installation.
Any repairs and maintenance work
on this dishwasher should be carried
out by authorised service staff only.
Unauthorised repairs are not only
dangerous, but also lead to the
cancellation of your warranty.
Make sure the electricity and water
connections of your dishwasher are
in compliance with the instructions for
assembly as stated in the relevant part
of this booklet.
Any water remaining in the dishwasher
after production should be carefully
removed due to reasons of hygiene.
Before the first wash, add 1 lt of
water to the salt container of your
machine.

Turbo fan heat drying system

Turbo Fan Heat Drying System
ensures your dishes are dried
efficiently.
! During operation you may hear noises
which is normal.
4

Installation

When deciding on where to install
your new dishwasher, ensure that the
position of your dishwasher makes it
easy and quick for you to place the
dishes in the dishwasher and also to
take them out and store away after the
dishwashing is completed.
Avoid placing the dishwasher where
the ambient temperature is likely to fall
below. 5 degrees C. (41° F)
When positioning your appliance, take
care not to damage your flooring, pipes
wall coverings etc. Do not move the
appliance by pulling by the door or
handle
7 GB

Advertisement

Table of Contents
loading

Table of Contents

Save PDF