Connecting Voltage - Obvius AcquiSuite Ally 12 User Manual

AcquiSuite Ally 12 & 48 User Guide (Rev D)
STEP 5) Attach high voltage cover
IP30
TOUCH SAFE (with internal cover installed)
STEP 6) Connect CT and Communications Wiring
C V
ONNECTING OLTAGE
Connect the voltage leads (L1, L2, L3, and N, as necessary) to the meter through a dedicated disconnect
or circuit breaker. A voltage lead of 14 AWG THHN Minimum 600VAC rating (or equivalent) is required.
IMPORTANT: Verify the circuit breaker is marked as the disconnect breaker for the meter.
31 | P a g e