Selecting A Standard Display; Overview Of The Operating Menus - Sennheiser EvolutionWireless EW 300 Series Instruction Manual

Selecting a standard display

EM 300
Press the jog dial to select a standard display:
Contents of the display
B.CH: 20.24
PEAK ew300 G3
40 0
543.200 MHz
-10
30
-20
20
-30 SKM300
EQ:
10
-40
P + 12dB
MUTE
RF AF
543.200 MHz
PEAK ew300 G3
40 0
SKM300
-10
30
835
-20
20
-30
10 Standard
-40
P – 12dB
MUTE
RF AF
PEAK
Soundcheck
40 0
-10
30
20.24 ew300 G3
-20
20
543.200
-30 MHz
10
-40
P
AF MUTE
RF
SK 300 and SKM 300
To select a standard display:
SK 300
Press the rocker button.
You can select the following standard displays: "Frequency/Name", "Channel/Frequency",
"Channel/Name".

Overview of the operating menus

For more detailed information on the operating menus, refer to the individual
instruction manuals of the devices. These instruction manuals can be down-
loaded from the respective product pages at www.sennheiser.com.
Selectable standard display
"Receiver Parameters"
appears after switch-on of the receiver and displays the
receiver parameters (see page 5).
"Transmitter Parameters" (transmitter type/microphone)
displays the microphone head (SKM only) and the transmitter
type.
"Soundcheck" (display with additional function)
displays the signal quality within the transmission area.
Information on the soundcheck function can be found in the
instruction manual of the EM 300 receiver available on the
ew G3 product page at www.sennheiser.com.
SKM 300
Overview of the operating menus
Move the multi-function
switch.
25