Sk 300 Bodypack Transmitter - Sennheiser EvolutionWireless EW 300 Series Instruction Manual

Putting the devices into operation
³
14

SK 300 bodypack transmitter

Inserting the batteries/accupack
For powering the bodypack transmitter, you can either use two 1.5 V AA size batteries or the
rechargeable Sennheiser BA 2015 accupack.
¹
Push the two catches
ment cover ¸.
¹
¸
¸
Insert the two batteries or the accupack as shown above.
Observe correct polarity when inserting the batteries/accupack.
Close the battery compartment.
The battery compartment cover
Charging the accupack
To charge the BA 2015 accupack:
Insert the bodypack transmitter into the L 2015 charger (optional accessory).
The L 2015 charger can only charge the combination BA 2015 accupack/bodypack
transmitter. Standard batteries (primary cells) or individual rechargeable battery
cells cannot be charged.
Connecting the microphone cable/line cable
The audio input is designed for the connection of both condenser microphones and other
audio sources. DC powering of the condenser microphones is via the audio input.
Use one of the recommended Sennheiser microphones or the optional CL 2 line cable.
Connect the 3.5 mm jack plug
3.5 mm jack socket MIC/LINE
Lock the 3.5 mm jack plug by screwing down the coupling ring
Via the operating menu, adjust the sensitivity of the microphone/line input.
in the direction of the arrows and open the battery compart-
¸
locks into place with an audible click.
from the Sennheiser microphone or line cable to the
³.
of the cable.