Tv Setup; Sound Menu - Beko 24" Operating Instructions Manual

TV set up
The TV set up is accessed through a menu
system.
Once you have stored your set up, this is the
set up the TV will default to when you switch
it on.
To enter the MAIN menu press the
Menu button.
Once in the MAIN menu use the
Program up and Program down
buttons to select items in the menu
and the OK/Z to access sub menus
or use the coloured fastext buttons
OK/Z
for quick access.
Red button - SOUND
Green button - PICTURE
Yellow button - PROGRAM TABLE
Blue button - SETUP
Pink button - FEATURES
MAIN MENU
SOUND
PICTURE
PROGRAM TABLE
SETUP
FEATURES
SELECT
OK
EXIT
Please note
If you do not press any buttons for 15 seconds
the TV will exit the menu system.
Sound menu (red button)
SOUND
VOLUME
BALANCE
SOUND TYPE MONO
SOUND MODE NORMAL
AVL ON
ON
DYNAMIC BASS
EQUALIZER
STORE
BACK
Select the required item in the menu
using the Program up/down buttons
and make the changes pressing
Volume up/down buttons. Use the
OK/Z button to enter EQUALIZER
sub menu.
Volume
Sets default volume using the Volume up
and down buttons.
To save your settings, select
STORE and press the OK/Z button.
STORED will be displayed. Press
the Menu button to go back to
the previous menu.
OK/Z
Balance
Sets the sound balance when the
TV is in stereo mode using the
Volume up and down buttons
To save your settings, select
STORE and press the OK/Z
OK/Z
button. STORED will be displayed.
Press the Menu button to go back
to the previous menu.
Sound type
This item shows STEREO when receiving
stereo transmission and MONO for mono
transmissions.
The TV can be produced to receive the
NICAM broadcasts as a optional
feature.
If the channel you are watching is in
Nicam stereo the On Screen Display
will show NICAM STEREO for a
while.
Please Note
If, while watching a nicam stereo channel,
the signal strength drops and the system
cannot receive nicam stereo the OSD will
show MONO. If the signal strength
increases again and nicam stereo can be
received again, the OSD will show
NICAM STEREO.
11