Network function
Network setting
Select "Setting" in the menu, and then press OK.
Press
to select "Network", and then press OK. It
/
displays the connect format.
Ethernet network connection
You can select "Ethernet" to connect the network.
DHCP
System will attempt to obtain IP address and other
information automatically.
Manual connection
You can setup IP address, Gateway, Subnet mask,
First DNS and Second DNS following the on-screen
instructions.
Wireless network connection
You can select "Wi-Fi" to connect the network.
When adjust "Wi-Fi" to "On", it displays the nearly
wireless network.
If the current network connection security is not
open, you should enter the password from software
keyboard by pressing OK on the remote control.
NOTE
• You can press MENU to select "Network" to switch the
connection between Ethernet network connection and
Wireless network connection.
Add network
You can add unbroadcast wireless network manually.
Enter the information about the unbroadcast wireless
network , and then select "Save". Now the TV is
connected to the unbroadcasted wireless network.
22
LC-50_60S50H_EN.indd 22
2017/09/15 18:09:38