Declaration Of Conformity; Product Information; Laser Information On The Product; Laser Classification For Class 2 Laser Products - Hilti PD-I Original Operating Instructions

Battery state of charge
Bluetooth
Add distances
Subtract distances
Reference
Timer
Data storage
1.4

Declaration of conformity

We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
1.5

Product information

products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
There is a label bearing the serial number on the bottom of the battery compartment.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Laser range meter
Generation
Serial no.
1.6

Laser information on the product

Designation and explanation
1.7

Laser classification for Class 2 laser products

The device complies with Laser Class 2 in accordance with IEC 60825-1:2014 /EN 60825-1:2014. These
devices can be used without further protective measures.
CAUTION
Risk of injury! Do not direct the laser beam toward persons.
▶ Never look directly into the source of the laser beam. In the event of direct eye contact, close your eyes
and move your head out of the path of the laser beam.
4 English
Printed: 28.09.2018 | Doc-Nr: PUB / 5455117 / 000 / 00
Class 2 laser.
Do not stare into the beam. Do not direct the beam toward other persons or
toward areas in which other persons, who are not involved in the work with
lasers, may be present.
PD-I
02