Putting The Set 830-Tv Into Operation; Setting Up The Transmitter - Sennheiser Set 830-TV Instruction Manual

Putting the Set 830-TV into operation

Putting the Set 830-TV into operation

Setting up the transmitter

Place the transmitter so that:
– there are no obstacles in the light path between trans-
mitter and receiver and
– transmitter and receiver are not exposed to direct sun-
light. Direct sunlight may interfere with the reception
and may damage the transmitter.
If you are using a
Plasma TV screens radiate an infra-red signal that can
adversely affect the transmission quality.
Make sure that the transmitter is placed as far as pos-
sible from your plasma TV screen.
If necessary, use a standard extension cable (3.5 mm
stereo jack plug) to reduce the distance between trans-
mitter and receiver. This extension cable is available from
your Sennheiser dealer.
Note:
One transmitter can be used to transmit to several
receivers on the same frequency.
6
plasma TV screen: