Summary of Contents for Black Box GigaTrue CAT6 JPM610A-R8
Page 1
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) Customer FREE technical support 24 hours a day, 7 days a week: Call 877-877-2269 or fax 724-746-0746 Support Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Information Web site: www.blackbox.com • E-mail: info@blackbox.com...
• This users’ manual If anything is missing or damaged, please contact Black Box at 877-877-2269 or info@blackbox.com. You will also need a punchdown tool (we suggest part number FT025A) to install the patch panel. The punchdown tool is not included with your patch panel.
GigaTrue CAT6 Component Level Patch Panels 3. Installation 1. Make sure that the screws on each of the four corners of the patch panel are tightly secured to your rack or cabinet. If necessary, use a screwdriver to tighten each screw. 2.
Page 4
GigaTrue CAT6 Component Level Patch Panels Figure 2. Terminating the wire conductors. 4. Optional: Place the stuffer caps on the terminated 110 blocks for added strain relief. 5. Optional: If you choose to use the cable management bar, assemble the support bar as shown in Figure 3. There are two screws supplied for each cable management bar supplied.
Page 5
GigaTrue CAT6 Component Level Patch Panels Before you begin to attach the cable support bar to the patch panel, make sure you have made all your after terminations in a row where the support bar will be mounted. Remove the top left screw and top right screw on the outer most plastic cover. Get your assembled cable management bar and use the double hooks to clips the bar to the plastic covers on the panel.
Page 8
About Black Box Black Box provides an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 60 seconds or less.